Moving shoes production process
2017-08-15 11:01:50
A car,
: this process, all parts of the outside of the sole of the shoe are stitched and assembled with a high head car, such as stitching, fastening, making bags, etc., and generally there are 20 processes.
Two, marking
1. skins. A piece of leather, hips, back and head for the best, heart-shaped upper row; under the worst.
2. strokes. According to different standards and requirements, using the template on a piece of leather were drawn around, back, side, heart-shaped, tongue, etc. the shape of single cross.
3. cutting. The blanking machine will be used to cut the selected parts one by one. Be consistent in location, direction and angle.
4. batches of leather. Uniformly cut the edges of the cut leather parts of different shapes.
5. tests. Check each skin for defects such as blood tendons, skin scars, etc., and, if anything, remove the leather.
Three,
1. soaking chemical skin. A material that is dipped on the heel of a shoe with disinfectant.
2. The material inside the heel. Stereotype.
3. place in Baotou. Objective to establish the primary root.
4. car side line. With before help, suture,
5. principal alignment. Finalize with the master setting machine.
6.; prune Lippi. Remove some excess corners to keep them glued.
7. brush glue. The purpose is to make the sole and the upper to be able to bond.
8. front machine pack. Make the shape of the shoes you want.
9. packs. Shape the middle part, and by the way, mend the case of the front help machine.
10. post machine heel. Shape heel.
11. pound shoes. Hammer out the shape of a leather shoe. Sharp or round, look here.
12. heat setting. Heat setting by vacuum sulfur box.
13. packing feet. Pull out the nails from the needle, remove the excess corners, and trim the front.
14. cleaning sole. Clean the soles of the feet.
15. dozen grinding wheels. Remove impurities and pores and make edges smooth.
16. decontamination. Decontamination with sole treatment agent.
17. sole; vamp brushing. Ready sticky.
18.; brushing two times after oven.
19. complex. Stick on the sole.
20. press. Pressure, more stereotypes.
21. chiller. Accelerate the coagulation of glue and strengthen the fastness.
22. pull head. Model out.
23. touch nails. Check again to get rid of the missing nails.
24. pad insole. Place different sizes of insoles.
25. uppers light. Injection molding machine.
26. polishing. Polishing machine.
27. acceptance. Quality management sampling inspection and acceptance.
No. 28. plus paste. Such as what material, what color, how many yards, etc..
29. packaging. Container shipment.
The production of a pair of shoes how much time?
: a production line that produces about 1000 pairs of shoes a day; 10 hours a day; an average of 36 seconds for producing a pair of shoes.
Quality management: source control, process monitoring, the reverse tracing of
1. strictly in accordance with the operation standard book. The operator of each process is the inspector of the previous process.
2. product sampling.
3. pairs of shoes scrap return analysis; summarize the problem.
4. process monitoring. Is the standard in place?.
5. analysis of market complaints, feedback analysis results to production department, and then improve the process.
